Technology Category
- Cybersecurity & Privacy - Intrusion Detection
- Networks & Connectivity - RFID
Applicable Industries
- Buildings
- Transportation
Applicable Functions
- Facility Management
- Product Research & Development
Use Cases
- Perimeter Security & Access Control
- Tamper Detection
Services
- System Integration
The Customer
Diversified Funding, Inc. (DFI)
About The Customer
Diversified Funding, Inc. (DFI) is a Boston-based company that recently purchased the Apartments at Remington Pond, formerly known as the Waterford Towers, in West Warwick, Rhode Island. The 161-unit apartment complex is located in the heart of bustling shopping plazas, dining options, and commercial business centers, close to major highways and transportation, and not far from downtown Providence, Newport, and TF Green Airport. The Apartments at Remington Pond are also located approximately one mile from the Station night club, where one of the deadliest nightclub fires in U.S. history took place. As a result of this tragedy, Rhode Island and especially the town of Warwick are stringent about meeting the latest fire and life safety codes.
The Challenge
Diversified Funding, Inc. (DFI) recently purchased the Apartments at Remington Pond in West Warwick, Rhode Island, and embarked on a major renovation project, including the installation of new Fire Alarm Systems in each of the seven buildings. The challenge for DFI was to ensure that the apartment building met the latest fire alarm codes, including the new sleeping room requirements listed in both the National Fire Protection Association (NFPA) 72 National Fire Alarm and Signaling Code and the NFPA 720 Standard for Installation Carbon Monoxide (CO) Detection and Warning Equipment. These codes require that audible appliances in sleeping areas produce different low frequency alarm signals - T3 for fire and T4 for Carbon Monoxide (CO) detection. To meet these requirements, DFI hired PowerComm Systems, a leading fire alarm and security provider in Rhode Island.
The Solution
PowerComm Systems selected the Wheelock Exceder LED low frequency sounders from Crown Supply Company, Eaton’s distributor of Wheelock notification appliances, to meet the NFPA’s latest codes. The Wheelock Exceder LED 520 Hz low frequency sounders can meet both sleeping room codes – NFPA 72 and NFPA 720 - with one device, which features two different sound patterns, T3 for fire detection and T4 for CO. The low frequency sounder strobes can replace a facility’s existing appliances, utilizing the same single pair of wires that are currently installed, offering a simple retrofit to meet new codes for sleeping rooms. The Exceder LED Low Frequency Sounder Strobes and Sounders feature multiple 520 Hz modes of operation, including T3 (fire), T4 (CO), Continuous (coded), and T3/T4 Sync Control.
Operational Impact
Quantitative Benefit
Case Study missing?
Start adding your own!
Register with your work email and create a new case study profile for your business.
Related Case Studies.
Case Study
Energy Saving & Power Monitoring System
Recently a university in Taiwan was experiencing dramatic power usage increases due to its growing number of campus buildings and students. Aiming to analyze their power consumption and increase their power efficiency across 52 buildings, the university wanted to build a power management system utilizing web-based hardware and software. With these goals in mind, they contacted Advantech to help them develop their system and provide them with the means to save energy in the years to come.
Case Study
Airport SCADA Systems Improve Service Levels
Modern airports are one of the busiest environments on Earth and rely on process automation equipment to ensure service operators achieve their KPIs. Increasingly airport SCADA systems are being used to control all aspects of the operation and associated facilities. This is because unplanned system downtime can cost dearly, both in terms of reduced revenues and the associated loss of customer satisfaction due to inevitable travel inconvenience and disruption.
Case Study
IoT-based Fleet Intelligence Innovation
Speed to market is precious for DRVR, a rapidly growing start-up company. With a business model dependent on reliable mobile data, managers were spending their lives trying to negotiate data roaming deals with mobile network operators in different countries. And, even then, service quality was a constant concern.
Case Study
Digitize Railway with Deutsche Bahn
To reduce maintenance costs and delay-causing failures for Deutsche Bahn. They need manual measurements by a position measurement system based on custom-made MEMS sensor clusters, which allow autonomous and continuous monitoring with wireless data transmission and long battery. They were looking for data pre-processing solution in the sensor and machine learning algorithms in the cloud so as to detect critical wear.
Case Study
Cold Chain Transportation and Refrigerated Fleet Management System
1) Create a digital connected transportation solution to retrofit cold chain trailers with real-time tracking and controls. 2) Prevent multi-million dollar losses due to theft or spoilage. 3) Deliver a digital chain-of-custody solution for door to door load monitoring and security. 4) Provide a trusted multi-fleet solution in a single application with granular data and access controls.
Case Study
Intelligent Building Automation System and Energy Saving Solution
One of the most difficult problems facing the world is conserving energy in buildings. However, it is not easy to have a cost-effective solution to reduce energy usage in a building. One solution for saving energy is to implement an intelligent building automation system (BAS) which can be controlled according to its schedule. In Indonesia a large university with a five floor building and 22 classrooms wanted to save the amount of energy being used.